2003 Link Meter - owner's manual

$ACROBAT

The following is the owner's manual for the Punch Link Meter display:


Installation

• Disconnect power to amplifiers.
• Install link to connect amplifiers.
  
  NOTE: Connect the following wires to only one amplifier.
   
  • Connect the Black wire to the Ground terminal.
  • Connect the Red wire to REM (remote turn on) terminal {Preferred} or to a +12 volt switched power source.
  • Reconnect power to amplifiers.
  
  
  • RFC3213 - Link Meter displays battery voltage and signal via LED display. Mounts in a Punch Link. [Download Owner's Manual]