1996 Punch Status Display PSD-1 - owner's manual

$ACROBAT

Below contains the installation and operation manual for the Punch Status Display (PSD-1) from 1996:

• PSD-1 - Punch Status Display [Download Manual]

---

NOTICE: When using the Power 500m mono amplifier with the PSD-1, an external "Interface Adapter" was required. The Interface Adapter was used on Power 500m amplifiers only - no other amplifier capable of utilizing the PSD-1 required the adapter. The Power 500m Interface Adapter must connect to the amplifier side of the Data Interface Cable for proper operation. DO NOT connect Power 500m amplifiers to the PSD-1 without the appropriate adapter or damage may occur.  This adaptor is no longer available, but we have provided the parts layout for you to build your own:

• PC-1331A - Power 500m Adaptor for PSD-1
   [Download Adaptor Instructions]
   [Download PCB Layout] 
   [Download PCB Drill Guide]